Protective Coatings
section epub:type=”chapter” role=”doc-chapter”> Chapter 18Protective Coatings 18.1 Introduction The last 20 years have seen a fast and steady increase of research into HTC. A quick survey with Scopus using the keywords…
Fluid Flow and Transfer Proccesses
section epub:type=”chapter” role=”doc-chapter”> Chapter 18Protective Coatings 18.1 Introduction The last 20 years have seen a fast and steady increase of research into HTC. A quick survey with Scopus using the keywords…
section epub:type=”chapter” role=”doc-chapter”> Chapter 10Nitridation 10.1 Introduction Nitridation is a process that results in the formation of nitrides in a material. It results from exposure to reducing high temperature environments…
section epub:type=”chapter” role=”doc-chapter”> Chapter 11Halogenation 11.1 Introduction Halogens and many halogen compounds are very corrosive. In fact, iodine was discovered when, as an impurity in soda ash, it caused corrosion…
section epub:type=”chapter” role=”doc-chapter”> Chapter 14Corrosion in Molten Metals 14.1 Introduction Molten metals, or liquid metals, are frequently used as heat transfer medium because of their excellent heat transfer properties. Due…
section epub:type=”chapter” role=”doc-chapter”> Chapter 12Corrosion by Hydrogen and Water Vapor 12.1 Introduction The lifetime of materials exposed to high temperatures is significantly decreased by high temperature oxidation, as it affects…
section epub:type=”chapter” role=”doc-chapter”> Chapter 20Case Studies We hope that the interest in including a chapter on case studies connected with high temperature corrosion in relevant industrial situations and related with…
2 Review of Thermodynamics, Fluid Mechanics, and Heat Transfer 2.0 Introduction The physics-based modeling of various internal flow systems in gas turbines requires a strong foundation in thermodynamics, fluid mechanics,…
4 Internal Flow around Rotors and Stators 4.0 Introduction The critical load-bearing structural components of the compressor and turbine in a gas turbine engine are essentially airfoils (vanes and blades)…
3 1-D Flow and Network Modeling 3.0 Introduction The main objective of an engineering analysis is to have the prediction results as close to the physical reality as possible. These…
1 Overview of Gas Turbines for Propulsion and Power Generation 1.0 Introduction This is the age of gas turbines with their ever-growing contributions to people’s living standard and well-being. As…